Gorilla Glue,Gorilla Wood Glue

Gorilla Glue,Gorilla Wood Glue
Zoom  Zoom
 Type: 2X Gorilla Glue 115mlType: 2X Gorilla Wood Glue 236ml 
Our Price:  £23.99

Bar Code:  5704947000110

Gorilla Glue, Gorilla Wood Glue

Gorilla glue 115 ml :

Product Dimensions : 13.1x4.4x4.4 cm

Ingredients :
-Gorilla Glue contains urethane prepolymer, diphenylmethane-diisocyanate, isomers, and homologs.

-The strongest, most powerful household glue on the market.
-The strong, expanding formula of Gorilla Glue handles the toughest jobs in and around the home, bonding wood, stone, metal, ceramics, foam, and glass in under two hours.
-Once applied, Gorilla Glue expands during curing and, once set, can be painted and stained.

Gorilla Wood Glue :

Product Dimensions : 23.6x22x18.6 cm

Ingredients :
-Water, Vinyl acetate polymer, Aluminum chloride, hexahydrate, 2-Propanol, 1-phenoxy.

-Gorilla Wood Glue is an adhesive that woodworkers, carpenters, and hobbyists trust for their woodworking projects.
-Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to-use, water-based adhesive, with Gorilla strength.
-This PVA glue is incredibly water-resistant and dries a natural color that offers an invisible bond line for your projects.

The direction of use :
1) Application :
For best results, the wood surfaces must be prepared before the application of glue.
Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping.

2) Clamping:
The technique and type of clamp to be used is determined by many factors
apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied.
Clamping Time: 2030 minutes for room temperature applications.

3) Clean Up
Clean up while the glue is wet: Use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue.
Clean up when the glue has dried: Use a sharp putty knife, razor, or sharp scraper to shave hardened glue from the surface, then sand as needed.
Cleaning the bottle tip: Use a clean, damp cloth to wipe off excess glue after closing. If the tip becomes clogged with dry glue, remove the cap and push the clog backward with a toothpick, then rinse cap with warm water.

-Incredibly strong
-100% waterproof
-Can be painted and stained when cured
-Goes on a dark, dries a light tan
-Cures in 1 to 2 hours
-Dries Natural Color

Continue ShoppingTell a Friend