Bar Code: 6942138949933
Bestway Fast Set Swimming Pool Above Ground Blue Inflatable 10ft x 30'', 3800L
Product Dimension: 31x27x27cm
Material: Heavy-duty PVC and polyester
The 10' x 30'' / 3.05m x 76cm Fast Set Pool by Bestway is a great family swimming pool. It sets up in only a matter of minutes on a flat surface as only the top ring needs to be inflated; the body of the pool has a liner that lifts when you fill the pool with water. It also comes with a flow control drain valve, allowing it to be drained quickly at the end of the season. The Fast Set Pool is constructed of tough Tritech material, making it extremely durable and guarantees to keep the family swimming for years to come!
-Heavy-duty PVC and polyester 3-ply sidewalls.
-The liner is supported by an inflatable top ring.
-Select a level surface, inflate the top ring and the pool will rise as itís filled with water.
-Built-in flow control drain valve makes it easy to drain by attaching the valve to a garden hose (with included adapter) to drain away water.
-Easy to take down for off-season storage.
-The pool is equipped with fittings for compatibility with Flowclear filter pumps.
-Water capacity (80%): 3,800 L (1,004 gals. )
-Underwater adhesive repair patch.†
-The extra strong side walls of this pool are constructed with Tritech, a 3 layer reinforced material with a polyester mesh core encased between two layers of high gauge PVC material. This creates a total thickness of 0.40-0.80mm (16-32 gauge) depending on the size of the pool, offering superior strength and durability.
-The pool must be set up on a completely flat and level surface. Please do not install the pool if the surface is inclined or sloped.†
-The selected location has to be capable of uniformly supporting the weight for the entire time the pool is installed, moreover, the location must be flat and must be cleared of all objects and debris including stones and twigs.†
-We recommend positioning the pool away from any objects children could use to climb into the pool. Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.
Dismantling the Pool :
-Unscrew the drain valve cap counter-clockwise and remove it.
-Connect the adaptor to the hose and put the other end of the hose in the area where you are going to drain your pool. (Check local regulations for drainage by-laws).
-Screw the control ring of the hose adaptor clockwise onto the drain valve. The drain valve will be open and water will start to drain automatically. Open the drain valve to the -maximum position.
-Deflate the top ring by squeezing the air valve.
-When the top ring is fully deflated, press the top ring down, and tilt it to drain the pool easily. Completely drain the water in the pool.
-When draining is finished, unscrew the control ring to close the valve.
-Disconnect the hose.
-Screw the cap back onto the drain valve.
-Air dry pool.
Box Contains :
1 x Fast Set 10' x 30"/3.05m x 76cm Pool Liner
Underwater adhesive repair patch
Installation and safety instructions