Bar Code: 6942138951387 Bestway Inflatable Family Paddling Swimming Round Pool 12ft X 30" With Filter Pump, 5377L Package Dimension: 31x59x30cm
Material: Tough Tritech The 12' x 30'' / 3.66m x 76cm Fast Set Pool by Bestway is a great family swimming pool. It sets up in only a matter of minutes on a flat surface as only the top ring needs to be inflated; the body of the pool has a liner that lifts when you fill the pool with water. It also comes with a flow control drain valve, allowing it to be drained quickly at the end of the season. The Fast Set Pool is constructed of tough Tritech™ material, making it extremely durable and guarantees to keep the family swimming for years to come! Supplied with all hoses and attachments, it will keep the water clean so you can keep it assembled in your garden for the whole summer. Despite being unbelievably easy and quick, this pool also comes with an extremely useful set-up and maintenance DVD so you just can't go wrong. It also comes with an underwater repair patch in case of any mishaps. Features : -3.66m x 76cm (12’ x 30’’) Pool Set
-Water capacity (80%): 5,377 L (1421 gal.)
-Easy setup
-Heavy-duty PVC and polyester 3-ply sidewalls
-Liner is supported by an inflatable top ring
-Select a level surface, inflate the top ring and the pool will rise as it’s filled with water
-Built-in flow control drain valve makes it easy to drain by attaching the valve to a garden hose (with included adapter) to drain away water
-Easy to take down for off-season storage
-The pool is equipped with fittings for compatibility with Flowclear filter pumps
-Underwater adhesive repair patch
-The extra strong side walls of this pool are constructed with Tritech, a 3 layer reinforced material with a polyester mesh core encased between two layers of high gauge PVC material. This creates a total thickness of 0.40-0.80mm (16-32 gauge) depending on the size of the pool, offering superior strength and durability
-58381GB filter pump (220-240V~, 330 gal pump water flow rate, 280 gals integrated pool system water flow rate), compatible with cartridge 58093 (Ⅰ) 220-240V Installation : -The pool must be set up on a completely flat and level surface. Please do not install the pool if the surface is inclined or sloped.
-The selected location has to be capable of uniformly supporting the weight for the entire time the pool is installed, moreover, the location must be flat and must be cleared of all objects and debris including stones and twigs.
-We recommend positioning the pool away from any objects children could use to climb into the pool. Position the pool near an adequate drainage system to deal with overflow or to discharge the pool. Dismantling the Pool : -Unscrew the drain valve cap counter-clockwise and remove it.
-Connect the adaptor to the hose and put the other end of the hose in the area where you are going to drain your pool. (Check local regulations for drainage by-laws).
Screw the control ring of the hose adaptor clockwise onto the drain valve. The drain valve will be open and water will start to drain automatically. Open the drain valve to the -maximum position.
-Deflate the top ring by squeezing the air valve.
-When the top ring is fully deflated, press the top ring down, and tilt it to drain the pool easily. Completely drain the water in the pool.
-When draining is finished, unscrew the control ring to close the valve.
-Disconnect the hose.
-Screw the cap back onto the drain valve.
-Air dry pool. Box Contains :
-1 x 3.66m x 76cm (12’ x 30’’) Pool Set
-Filter Pump
-Underwater adhesive repair patch
-Installation and safety instructions | 
